Plastic encoder coupling

Shaft encoders must be protected against excessive mechanical stresses, which occur whenever there are angular, axial, or radial misalignments between the machine and shaft encoder shafts. Our flexible couplings can compensate for this within limits.

Category: , , , , , , .

Related Products

  • S21 sin/cos motorfeedback encoder

    The sinewave encoder S21, developed specifically for motor feedback applications. Has conical shaft and 1 Vss sin/cos signal. Encoder S21 is well known for its broad temperature range from -15°C to +120°C, which enables the motor to be used to capacity more effectively. Thanks to the broad bandwidth of 500 KHz at full signal quality, peak speeds can be achieved, while excellent immunity to interference and high functional dependability through signal control and system monitoring ensure reliable operation.

    Technology:
    Optical
    Body Ø, mm:
    53
    Shaft type:
    Hollow / Solid
    Shaft Ø, mm:
    8; 12,7 / cone 10
    Temperature (°C):
    -15 … 120
    Speed (rpm):
    12000
    Protection Class:
    IP40
    Resolution (bit) MT / ST:
    1024 / 2048
    Output:
    SinCos 1Vss

  • AX73 absolute magnetic encoder

    Explosion-proof, absolute encoder AX73 with interfaces SSI/BiSS or Profibus. The optical scanning system of the AX73 encoder provides a highly accurate, high-resolution sensor signal that is also resistant to the strongest external magnetic fields. The connection concept of the AX73 allows the routing of cabling and the final encoder installation to be done in separate steps. This provides significant cost and time savings during installation, as cabling can be done in advance. Emergency servicing can also be done more quickly, due to the ability to simply unplug the encoder cable and plug it into the replacement encoder. AX73 has ATEX and IECEx approvals.

    Approval:
    CE, ATEX, IECEx
    Body Ø, mm:
    73,5 / 76
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    -40 ... +70
    Speed (rpm):
    3000
    Protection Class:
    IP66 / IP67
    Resolution (bit) MT / ST:
    12 / 10 … 22
    Interface:
    BiSS / SSI / Profibus
    Housing Option:
    Stainless Steel
    Connection:
    Terminal Box

  • AX70 absolute optical encoder

    Explosion-proof AX70 absolute encoders with an aluminium housing have been designed specifically for use in potentially explosive atmospheres. The pressure-resistant housing has been developed in compliance with the EN 60079 series of standards for use in explosive atmospheres and is permitted for use in environments where there is a risk of gas or dust explosion, zones 1 and 21. The encoders are available with BiSS / SSI / CANopen / Profibus / DeviceNET / SSI programmable interfaces for use in various applications.

    Approval:
    CE, ATEX, IECEx
    Body Ø, mm:
    70
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    -40 ... +60
    Speed (rpm):
    10000
    Protection Class:
    IP64 / IP67
    Resolution (bit) MT / ST:
    12 / 10 … 17
    Interface:
    BiSS / SSI / CANopen / Profibus / DeviceNET / SSI programmable
    Housing Option:
    Aluminium
    Connection:
    Cable

  • RX70 incremental optical encoder

    Explosion-proof RX70 incremental encoders with an aluminium housing have been designed specifically for use in potentially explosive atmospheres. The pressure-resistant housing has been developed in compliance with the EN 60079 series of standards for use in explosive atmospheres and is permitted for use in environments where there is a risk of gas or dust explosion, zones 1 and 21.

    Approval:
    CE, ATEX, IECEx
    Body Ø, mm:
    70
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    -40 ... +60
    Speed (rpm):
    10000
    Protection Class:
    IP64 / IP67
    Resolution (bit) MT / ST:
    up to 10000
    Output:
    Push pull / Push pull complimentary / RS422
    Housing Option:
    Aluminium
    Connection:
    Cable