LIR-DA2110 big hollow shaft optical absolute encoder


High precision absolute encoder LIR-DA2110 provide highest resolution up to 26 bit and accuracy up to +/- 5″. It has big hollow shaft: 60 mm. Encoder based on optical technology also called absolute angular encoder or absolute transducer. LIR-DA2110 suitable for responsible applications with high accuracy required: metrology and laboratory equipments, machine tools, medicine, antennas, industrial robots, printing machines, etc. Big hollow shaft suitable for market needs and brings easy installation. Two different installation versions exist LIR-DA2110A and LIR-DA2110B.


Related Products

  • ar63_hauptfoto_reautomatico-ou

    AR63 multiturn stainless steel magnetic absolute encoder

    The special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    5000
    Protection Class:
    IP67 / IP69K
    Resolution (bit) MT / ST:
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    BiSS / SSI / CANopen / Analog
  • ad58_hauptfoto_reautomatico-ou

    AD58 multiturn optical absolute encoder

    The AD58 multi-turn absolute encoder is an optical encoder with a multi-turn gear and optical scanning. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings with a flexible torque support. As a result, these encoders are suitable for incorporating in BLDC servo motors and such demanding applications as CNC, precision positioning and high-resolution printing. The encoder is available with resolutions of up to 22 bits single-turn and 12 bits multi-turn.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid / Hollow
    Shaft Ø, mm:
    cone 10 / 10 … 12
    Temperature (°C):
    - 15 … 120
    Speed (rpm):
    10000
    Protection Class:
    IP40
    Resolution (bit) MT / ST:
    12 / 12 ... 22
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI
  • lir-da138r-multiturn-absolute-encoder-reautomatico-ou

    LIR-MA137R multiturn magnetic absolute encoder

    Encoder LIR-MA137R is an magnetic absolute rotary encoder with a multi-turn gearbox and magnetic scanning, body diameter 36,5 mm. It has solid shaft 6 mm and physically compatible with standard incremental encoders. It is possible to make full use of the technical benefits of absolute multi turn encoders in industrial equipment. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. Encoder LIR-MA137R offering multi-turn resolution 12 bit, single turn resolution up to 12 bit, the same performance data as the 58 mm variants but with a smaller device size.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    36,5
    Shaft type:
    Solid
    Shaft Ø, mm:
    6
    Temperature (°C):
    - 40 … 85
    Speed (rpm):
    6000
    Protection Class:
    IP64
    Resolution (bit) MT / ST:
    12 / 8 … 12
    Accuracy:
    +/-1°
    Interface:
    SSI
  • ad34_hauptfoto_reautomatico-ou

    AD34 multiturn optical absolute encoder

    The AD 34 is the most compact absolute encoder. It is available with a resolution of up to 19 bits single-turn and 12 bits multi-turn. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings with a flexible torque support. Thanks to its innovative shaft assembly system, the AD34 saves time when configuring the motor shaft. Just a simple 6 mm central bore in the “B” end of the motor shaft is sufficient. The notched shaft of the AD34 is press-fitted in the “B” end of the motor shaft in a single operation. The BiSS or SSI communication interface enables control circuits to be set up that are completely digital.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    37,5
    Shaft type:
    Solid
    Shaft Ø, mm:
    6
    Temperature (°C):
    - 15 … 120
    Speed (rpm):
    10000
    Protection Class:
    IP40
    Resolution (bit) MT / ST:
    12 / 12 ... 19
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI