LIR-MA208 miniature magnetic absolute encoder

Small and robust. Miniature absolute magnetic encoder LIR-MA208 has only 8 mm body diameter and up to 12 bit resolution. Hub shaft diameter is 3 mm. Encoder based on ON AXIS magnetic technology. Magnetic absolute encoder LIR-MA208 suitable for applications with compact size : robots, medicine, cameras, compact motors, etc. Magnetic technology very robust in relation to environment.

Category: , , .

Related Products

  • AR63 multiturn stainless steel magnetic absolute encoder

    The special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    5000
    Protection Class:
    IP67 / IP69K
    Resolution (bit) MT / ST:
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    BiSS / SSI / CANopen / Analog

  • AD58 multiturn optical absolute encoder

    The AD58 multi-turn absolute encoder is an optical encoder with a multi-turn gear and optical scanning. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings with a flexible torque support. As a result, these encoders are suitable for incorporating in BLDC servo motors and such demanding applications as CNC, precision positioning and high-resolution printing. The encoder is available with resolutions of up to 22 bits single-turn and 12 bits multi-turn.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid / Hollow
    Shaft Ø, mm:
    cone 10 / 10 … 12
    Temperature (°C):
    - 15 … 120
    Speed (rpm):
    10000
    Protection Class:
    IP40
    Resolution (bit) MT / ST:
    12 / 12 ... 22
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI

  • LIR-DA138R multiturn optical absolute encoder

    Encoder LIR-DA138R is an optical absolute rotary encoder with a multi-turn gearbox and optical scanning, body diameter 38 mm. It has solid shaft 4 mm and physically compatible with standard incremental encoders. It is possible to make full use of the technical benefits of absolute multi turn encoders in industrial equipment: robots, machine tools, conveyors, elevators, packing and cutting equipment, etc. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. Encoder LIR-DA138R offering multi-turn resolution 12 bit, single turn resolution up to 16 bit, the same performance data as the 58 mm variants but with a smaller device size.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    38
    Shaft type:
    Solid
    Shaft Ø, mm:
    4
    Temperature (°C):
    - 40 … 85
    Speed (rpm):
    6000
    Protection Class:
    IP64
    Resolution (bit) MT / ST:
    12 / 8 … 16
    Accuracy:
    +/-30"
    Interface:
    SSI

  • AC36 multiturn optical absolute encoder

    The AC36 is an optical absolute rotary encoder with a multi-turn gearbox and optical scanning, size 36 mm. It is fitted with a solid shaft and physically compatible with standard incremental encoders. Thanks to its compact construction, the AC36 can directly replace corresponding incremental encoders. As a result, it is possible to make full use of the technical benefits of absolute encoders in equipment manufacturing and medical engineering, to name but two of the many applications. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. The AC36 offering the same performance data as the 58 mm variants but with a smaller device size.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    38,1
    Shaft type:
    Solid / Hub
    Shaft Ø, mm:
    6 / 8
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    10000
    Protection Class:
    IP50 / IP64
    Resolution (bit) MT / ST:
    12 / 12 ... 22
    Accuracy:
    +/-35"
    Interface:
    SSI / BiSS