• AC58 multiturn optical absolute encoder

    The AC58 series combines a series of absolute rotary encoders with optical scanning for numerous fields of application. The 58 mm encoders are available as solid-shaft or hollow-shaft models and meet the requirements for nearly every demanding industrial application and use involving motor feedback. As single-turn and multi-turn versions, these encoders achieve a resolution of up to 34 bits (22 bits single-turn, 12 bits multi-turn, depending upon interface). Apart from connections by SSI/ BiSS, many other interfaces such as EtherCAT, Profibus, CANopen, CANlayer2, DeviceNet, Interbus and SUCOnet are available.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid / Hollow
    Shaft Ø, mm:
    6 … 12/ 9,52 … 14
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    10000
    Protection Class:
    IP50 / IP64 / IP67
    Resolution (bit) MT / ST:
    4 … 12 / 10 ... 22
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI / CANopen / CANLayer2 / Profibus DeviceNET / Inerbus / Parrallel / SUCOnet / EtherCAT / SSI programmable

  • AR60 multiturn magnetic absolute encoder

    The AR60 absolute multi turn encoder has robust housing and suitable for heavy duty application. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR60 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles, marine cranes just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR60 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    10000
    Protection Class:
    IP64 / IP67
    Resolution (bit) MT / ST:
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    SSI / CANopen / Analog

  • AD58 multiturn optical absolute encoder

    The AD58 multi-turn absolute encoder is an optical encoder with a multi-turn gear and optical scanning. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings with a flexible torque support. As a result, these encoders are suitable for incorporating in BLDC servo motors and such demanding applications as CNC, precision positioning and high-resolution printing. The encoder is available with resolutions of up to 22 bits single-turn and 12 bits multi-turn.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid / Hollow
    Shaft Ø, mm:
    cone 10 / 10 … 12
    Temperature (°C):
    - 15 … 120
    Speed (rpm):
    10000
    Protection Class:
    IP40
    Resolution (bit) MT / ST:
    12 / 12 ... 22
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI

  • AR62 multiturn magnetic absolute encoder

    The special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    5000
    Protection Class:
    IP67 / IP69K
    Resolution (bit) MT / ST:
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    BiSS / SSI / CANopen

  • AR63 multiturn stainless steel magnetic absolute encoder

    The special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    5000
    Protection Class:
    IP67 / IP69K
    Resolution (bit) MT / ST:
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    BiSS / SSI / CANopen / Analog

  • LIR-MA158R multiturn magnetic absolute encoder

    Encoder LIR-MA158R is an magnetic absolute rotary encoder with a multi-turn gearbox and magnetic scanning, body diameter 58 mm. It has solid shaft 6 mm and physically compatible with standard incremental encoders. It is possible to make full use of the technical benefits of absolute multi turn encoders in industrial equipment: machine tools, robots, medical equipment, conveyors, elevators, packing and food machines, printing machines. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. Encoder LIR-MA158R offering multi-turn resolution 14 bit, single turn resolution up to 12 bit.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    6
    Temperature (°C):
    - 40 … 85
    Speed (rpm):
    6000
    Protection Class:
    IP64
    Resolution (bit) MT / ST:
    12 … 14 / 8 … 12
    Accuracy:
    +/-1°
    Interface:
    SSI

  • LIR-DA158R multiturn optical absolute encoder

    Encoder LIR-DA158R is an optical absolute rotary encoder with a multi-turn gearbox and optical scanning, body diameter 58 mm. It has solid shaft 6 mm and physically compatible with standard incremental encoders. It is possible to make full use of the technical benefits of absolute multi turn encoders in industrial equipment: robots, machine tools, conveyors, elevators, packing and cutting equipment, etc. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. Encoder LIR-DA158R offering multi-turn resolution 14 bit, single turn resolution up to 21 bit.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    6
    Temperature (°C):
    - 40 … 85
    Speed (rpm):
    6000
    Protection Class:
    IP64
    Resolution (bit) MT / ST:
    12 … 14 / 8 … 21
    Accuracy:
    +/-30"
    Interface:
    SSI

  • AC59 multiturn stainless steel optical absolute encoder

    The AC59 series combines a series of absolute rotary encoders with optical scanning that have been specially designed for use in extreme ambient conditions. The size 58 mm encoders have a stainless steel housing and are particularly suited to oil and gas applications, marine fittings, the food industry, packaging industry and offshore applications. As single-turn and multi-turn versions, these encoders achieve a resolution of up to 29 bits (17 bits single-turn, 12 bits multi-turn).

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52; 10
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    6000
    Protection Class:
    IP67
    Resolution (bit) MT / ST:
    12 / 10 ... 17
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI / Parallel

  • AC61 multiturn stainless steel optical absolute encoder

    The AC61 series combines a series of absolute rotary encoders with optical scanning that have been specially designed for use in extreme ambient conditions. The size 58 mm encoders have a stainless steel housing and are particularly suited to oil and gas applications, marine fittings, the food industry, packaging industry and offshore applications. As single-turn and multi-turn versions, these encoders achieve a resolution of up to 29 bits (17 bits single-turn, 12 bits multi-turn). Connection options are parallel output, Profibus, CANopen, CANlayer2, DeviceNet and Interbus.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    61,5
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52; 10
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    6000
    Protection Class:
    IP67
    Resolution (bit) MT / ST:
    4 … 12 / 10 ... 17
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI / CANopen / CANLayer2 / Profibus DeviceNET / Parrallel / SSI programmable