LIR-DA216 miniature optical absolute encoder

Small, high resolution and robust. Miniature absolute optical encoder LIR-DA216 has 16 mm body diameter and up to 16 bit resolution. Hub shaft diameter is from 2 mm to 3,175 mm. Encoder based on optical technology. LIR-DA216 suitable for applications with compact size : robots, medicine, cameras, compact motors, pharmacy, aerospace, laboratory equipment, pick and place equipment, etc.

Category: , , .

Related Products

  • LIR-MA158R multiturn magnetic absolute encoder

    Encoder LIR-MA158R is an magnetic absolute rotary encoder with a multi-turn gearbox and magnetic scanning, body diameter 58 mm. It has solid shaft 6 mm and physically compatible with standard incremental encoders. It is possible to make full use of the technical benefits of absolute multi turn encoders in industrial equipment: machine tools, robots, medical equipment, conveyors, elevators, packing and food machines, printing machines. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings. Encoder LIR-MA158R offering multi-turn resolution 14 bit, single turn resolution up to 12 bit.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    6
    Temperature (°C):
    - 40 … 85
    Speed (rpm):
    6000
    Protection Class:
    IP64
    Resolution (ppr):
    12 … 14 / 8 … 12
    Accuracy:
    +/-1°
    Interface:
    SSI

  • AR62 multiturn magnetic absolute encoder

    The special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    5000
    Protection Class:
    IP67 / IP69K
    Resolution (ppr):
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    BiSS / SSI / CANopen

  • AR60 multiturn magnetic absolute encoder

    The AR60 absolute multi turn encoder has robust housing and suitable for heavy duty application. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR60 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles, marine cranes just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR60 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.

    Multiturn:
    Yes
    Technology:
    Magnetic
    Body Ø, mm:
    58
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    - 40 … 100
    Speed (rpm):
    10000
    Protection Class:
    IP64 / IP67
    Resolution (ppr):
    12 … 16 / 12
    Accuracy:
    +/-1°
    Interface:
    SSI / CANopen / Analog

  • AD36 multiturn optical absolute encoder

    The AD 36 is an optical absolute encoder with a multi-turn gear and optical scanning, size 36 mm. It offers an 8 mm through hollow shaft, which allows resolver-compatible installation. The mechanical concept is based on a shaft assembly mounted in dual ball-bearings with a flexible torque support. The AD36 is suitable for fitting in BLDC servo motors with small frame heights. The BiSS or SSI communication interface enables control circuits to be set up that are completely digital. It is available with resolutions of up to 22 bits single-turn and 12 bits multi-turn.

    Multiturn:
    Yes
    Technology:
    Optical
    Body Ø, mm:
    37,5
    Shaft type:
    Hollow / Hub
    Shaft Ø, mm:
    8 / 8
    Temperature (°C):
    - 15 … 120
    Speed (rpm):
    10000
    Protection Class:
    IP40
    Resolution (ppr):
    12 / 12 ... 22
    Accuracy:
    +/-35"
    Interface:
    BiSS / SSI