Encoders for Vehicle Automation Industry
Vehicles and transport, such as trucks (fire engines, concrete pumps), excavators, drills, hammering systems, agricultural vehicles (harvesters), construction machinery (graders, bulldozers, loaders), municipal transport, public transport (streetcars, buses, trolleybuses) and special vehicles represent a growing market with increasingly demanding requirements. Speed and position control have become an important aspect of this equipment. Crane booms and antennas, electric steering systems, speed and rate indicators, wheel position and hybrid electric vehicle (HEV) motor systems are common applications where encoders are found, as encoders and resolvers offer greater accuracy and durability than traditional speed and position sensors. Some applications require explosion-proof certification.
Investing in high-quality encoders is essential to ensure the reliability and efficiency of vehicle automation systems. Contact us to find out more about our advanced encoder solutions for vehicle automation.
We offer encoder and sensor solutions
- For Construction Machines
- For Public Transport
- For Loader
- For Trucks
Benefits for partners
- ATEX certifications
- Reliable encoder construction for harsh environment
- High Resistance to Shock and Vibration
- Absolute and Incremental positioning, wide range of interfaces
- Tested up to 400G shock and 20G vibration
- Reliable output signal
Suitable products
Heavy Duty Encoders
-
AR62 multiturn magnetic absolute encoder
Product DescriptionThe special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.
Multiturn:YesTechnology:MagneticBody Ø, mm:58Shaft type:SolidShaft Ø, mm:9,52 … 12Temperature (°C):- 40 … 100Speed (rpm):5000Protection Class:IP67 / IP69KResolution (bit) MT / ST:12 … 16 / 12Accuracy:+/-1°Interface:BiSS / SSI / CANopen -
AR63 multiturn stainless steel magnetic absolute encoder
Product DescriptionThe special features of the AR62/ 63 include not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR62/ 63 will cope with extreme acceleration, marked changes in climatic conditions and even work normally under water. This means it is predestined for use in wind turbines, ships and commercial vehicles just as much as in presses, wood-processing machines or stone masonry. In terms of its electrical design, the AR62 is compatible with standard industrial controller systems. The interfaces available are SSI, BiSS, CANopen and analogue. The encoder is available with resolutions from up to 12 bits as a single-turn unit and 16 bits as a multi-turn device.
Multiturn:YesTechnology:MagneticBody Ø, mm:58Shaft type:SolidShaft Ø, mm:9,52 … 12Temperature (°C):- 40 … 100Speed (rpm):5000Protection Class:IP67 / IP69KResolution (bit) MT / ST:12 … 16 / 12Accuracy:+/-1°Interface:BiSS / SSI / CANopen / Analog -
HDN58 Shaft-less Encoder
Product DescriptionThe disc-shaped HDN58 is perfect for those speed monitoring and positioning applications where compact size, non-contact functioning is needed. Encapsulated electronics and delrin housing make it ideal for harsh wash-down applications. Application: Spreaders, Pay-out reels, Augers, Conveyors Lifts, Articulation arms, Crane booms.
Body Ø, mm:57,91Shaft type:noShaft Ø, mm:noTemperature (°C):-25 ... +75Speed (rpm):3000Protection Class:IP67Resolution (bit) MT / ST:up to 512Output:Push pull / RS422Housing Option:PlasticConnection:Connector -
HS35R Heavy Duty Hollow shaft Encoder
Product DescriptionThe flagship of the Dynapar product line, the HS35R series is the ruggedized version of the original vector-duty hollow-shaft encoder. With 400g shock rating, IP67 sealing, and wide -40ºC to 100ºC temperature range, the HS35R raises the bar on vector-duty encoder performance providing increased reliability and maximize equipment uptime in mill and heavy duty plant environments. Application: Drawworks drums, mud pumps, catwalks, hoists, winches & motors, Motor and drive speed feedback, Converting Machinery, Material Handling, Packaging Equipment, Pickling Equipment, Processing Equipment, Elevators, PLC’s and electronic counters musement rides.
Body Ø, mm:96,52Shaft type:HollowShaft Ø, mm:6…28Temperature (°C):-40 ... +100Speed (rpm):6000Protection Class:IP67Resolution (bit) MT / ST:up to 5000Output:Open Collector / Push pull / RS422Housing Option:AluminiumConnection:Cable / Connector
-
AC59 multiturn stainless steel optical absolute encoder
Product DescriptionThe AC59 series combines a series of absolute rotary encoders with optical scanning that have been specially designed for use in extreme ambient conditions. The size 58 mm encoders have a stainless steel housing and are particularly suited to oil and gas applications, marine fittings, the food industry, packaging industry and offshore applications. As single-turn and multi-turn versions, these encoders achieve a resolution of up to 29 bits (17 bits single-turn, 12 bits multi-turn).
Body Ø, mm:58Shaft type:SolidShaft Ø, mm:9,52; 10Temperature (°C):- 40 … 100Speed (rpm):6000Protection Class:IP67Resolution (bit) MT / ST:12 / 10 ... 17Interface:BiSS / SSI / Parallel -
AC61 multiturn stainless steel optical absolute encoder
Product DescriptionThe AC61 series combines a series of absolute rotary encoders with optical scanning that have been specially designed for use in extreme ambient conditions. The size 58 mm encoders have a stainless steel housing and are particularly suited to oil and gas applications, marine fittings, the food industry, packaging industry and offshore applications. As single-turn and multi-turn versions, these encoders achieve a resolution of up to 29 bits (17 bits single-turn, 12 bits multi-turn). Connection options are parallel output, Profibus, CANopen, CANlayer2, DeviceNet and Interbus.
Body Ø, mm:61,5Shaft type:SolidShaft Ø, mm:9,52; 10Temperature (°C):- 40 … 100Speed (rpm):6000Protection Class:IP67Resolution (bit) MT / ST:4 … 12 / 10 ... 17Interface:BiSS / SSI / CANopen / CANLayer2 / Profibus / DeviceNET / Parallel / SSI programmableHousing Option:Stainless steelConnection:Cable / Bus cover -
CD150 wire actuated linear encoder
Product DescriptionCD150 wire actuated linear encoder up to 6 m measuring length also called rope encoder, draw wire encoder, cable length transducers. They are easy to mount. System has wire drum, measuring wire and rotary encoder, which is coupled to a spring loaded-reel using a mechanical coupling device, internal to the housing of the reel. A cable coiled on the reel and end of cable connected to mechanism which movement being measured. The drum is rotated by pulled cable and the linear motion is transmitted into rotary motion, at which point the draw wire encoder encodes the information into an electric signal. Application: shop floors, manufacturing lines, and off-road vehicles, cranes, forklifts, oil and gas drilling equipment, and wood-working and stone-working machines.
Technology:OpticalMeasuring Length, mm:≤ 6000Temperature (°C):-20 … 85Speed (m/s):≤ 10Protection Class:IP64Resolution (pulses/turn):8192Linearity (%):± 0,05; ± 0,01Interface:SSI / Profibus / CANopen / DeviceNET Analog / Potentiometr 1kΩCircumference drum, mm:409,6 -
RI64 optical incremental encoder
Product DescriptionThe robust, economical RI64 hollow shaft incremental encoder stands out because it is the best value for money in its class. The insulated shaft coated with hard ceramic protects the bearings effectively against motor currents. The high ingress protection, IP67, also applies to through hollow shafts and, together with the unit’s high resistance to impacts and vibrations, is suitable for use in tough ambient conditions. With a line count of up to 5000, this robust encoder is suitable not only for many industrial applications but, in particular, for use as a feedback encoder for asynchronous motors.
Technology:OpticalBody Ø, mm:63Shaft type:HollowShaft Ø, mm:10 … 16Temperature (°C):-40 … 100Speed (rpm):12000Protection Class:IP64 / IP67Resolution (ppr):up to 5 000Accuracy:+/-75"Output:Push pull / RS422