Bellows encoder coupling

Shaft encoders must be connected to operated shaft and protected against excessive mechanical stresses, which occur whenever there are angular, axial, or radial misalignments between the machine and encoder shafts. At the same time the coupling needs to compensate for displacements without any big forces and positioning loss affecting the components of the encoder. Our flexible couplings can compensate for this within limits. Bellows coupling usually compensate higher misalignment.

Category: , , , , , , .

Related Products

  • HD20 Hazardous Duty Optical Encoder

    The HD20 Harsh-Duty Optical Encoder is ideal for machine applications with corrosive environments that demand stringent wash-down environments, including those where high pressure steam or caustic chemicals are needed to meet regulatory requirements. This compact, special-duty encoder is designed to exceed IP66/IP67 and NEMA 6 enclosure requirements with a PPR range through 3600. ATEX certification is also available for intrinsically safe applications. Application: Converting Machinery, Material Handling, Packaging Equipment, Pickling Equipment, Processing Equipment.

    Approval:
    CE, ROHS, CSA, ATEX
    Body Ø, mm:
    52,3x52,3
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52; 10
    Temperature (°C):
    -40 ... +80
    Speed (rpm):
    10000
    Protection Class:
    IP67
    Resolution (bit) MT / ST:
    up to 3600
    Output:
    Open Collector / Push pull / RS422
    Housing Option:
    Stainless steel / Aluminium / Nickel Finish
    Connection:
    Cable / Connector

  • HD25 Hazardous Duty Optical Encoder

    The HD25 Harsh-Duty Optical Encoder is identical to the HD20 but larger in size and capable of a higher resolution. It is ideal for machine applications with corrosive environments that demand stringent wash-down environments, including those where high pressure steam or caustic chemicals are needed to meet regulatory requirements. This compact, special-duty encoder is designed to exceed IP66/IP67 and NEMA 6 enclosure requirements with a PPR range through 3600. ATEX certification is also available for intrinsically safe applications (refer to Hazardous Duty HD25). Application: Top Drives, Iron Roughnecks, Wireline, Logging, Coiled Tubing, Cementing and Fracing/Blenders; Converting Machinery; Material Handling; Packaging Equipment; Pickling Equipment; Processing Equipment; Length measurements; Motor and drive speed feedback; Cut-to-length (textile, paper, wood, metal, rubber, plastics, etc.); PLC’s and electronic counters.

    Approval:
    CE, ROHS, CSA, ATEX
    Body Ø, mm:
    67,3x67,3
    Shaft type:
    Solid
    Shaft Ø, mm:
    9,52 … 12
    Temperature (°C):
    -40 ... +80
    Speed (rpm):
    6000
    Protection Class:
    IP67
    Resolution (bit) MT / ST:
    up to 5000
    Output:
    Open Collector / Push pull / RS422
    Housing Option:
    Stainless steel / Aluminium / Nickel Finish
    Connection:
    Cable / Connector

  • RX70 incremental optical encoder

    Explosion-proof RX70 incremental encoders with an aluminium housing have been designed specifically for use in potentially explosive atmospheres. The pressure-resistant housing has been developed in compliance with the EN 60079 series of standards for use in explosive atmospheres and is permitted for use in environments where there is a risk of gas or dust explosion, zones 1 and 21.

    Approval:
    CE, ATEX, IECEx
    Body Ø, mm:
    70
    Shaft type:
    Solid
    Shaft Ø, mm:
    10
    Temperature (°C):
    -40 ... +60
    Speed (rpm):
    10000
    Protection Class:
    IP64 / IP67
    Resolution (bit) MT / ST:
    up to 10000
    Output:
    Push pull / Push pull complimentary / RS422
    Housing Option:
    Aluminium
    Connection:
    Cable

  • ISD37 Hazardous Duty Optical Encoder

    The ISD37 Series is designed for Extreme Duty applications. This robust encoder features a double-sealed housing that allows applications where regulatory wash-down or caustic chemicals are present. It can operate in high shock and vibration environments and is an Intrinsically Safe version, certified to ATEX, when used with the appropriate IS Barrier. Application: Top Drive applications; Drawwork Motors & Drums; Rotary Tables and Mud Pumps; Pulp and Paper Applications; Steel Mill Applications.

    Approval:
    CE, ROHS, CSA, ATEX
    Body Ø, mm:
    95,25
    Shaft type:
    Hollow
    Shaft Ø, mm:
    6 … 25,4
    Temperature (°C):
    -40 ... +80
    Speed (rpm):
    6000
    Protection Class:
    IP67
    Resolution (bit) MT / ST:
    up to 5000
    Output:
    Open Collector / Push pull / RS422
    Housing Option:
    Stainless steel / Aluminium / Nickel Finish
    Connection:
    Cable / Connector